DIY TEA TOWEL ART

This is very best kind of DIY: easy and cheap! Such fantastic designs are now available as the humble tea towel. You can even get your favourite artist in linen form. Here are my favourite local options:

DIY, Tea Towel Art

PAUL-HODGES-tea-towel_large

See? tea towels as art is totally legit. Once you’ve made your design choice, here’s how to get it on the wall in a totally pro way.

Materials:

  1. Tea towel 
  2. Canvas. You  just need to make sure that the tea-towel can wrap around the canvas and be stapled onto the back. Hot tip: buy your tea-towel first and take it with you when choosing your canvas. Plenty of cheap options at The Warehouse, Warehouse Sationery or at places like Pete’s Emporium or the $1,2,3 dollar shops. You don’t need to worry about canvas quality at all, It won’t be seen and is just being used for it’s frame. For this project I used a 50cm x 60cm canvas.
  3. Staple-gun and staples. Available at places like Warehouse Stationery or Mitre10 Mega.
  4. Iron
  5. Hammer (if you need to hammer in any stubborn staples)
  6. Pliers (if you need to pull out any staples).

Instructions:

  1. Iron any creases out of the tea-towel. Be fussy, it pays off. Use it on steam setting for a super smooth surface, but iron it on the reverse to protect the screen-print (smudging the print with the heat of the iron would be game over).

IRONING OUT THE CREASES.

2. Line up the tea towel on top of the canvas so you get the image positioned correctly, hold tightly and  flip over onto a clean bath towel on the floor. I recommend the floor not a table so you can really put your weight into the stapling.

PLACE THE CANVAS ON THE REVERSE OF THE TEA TOWEL

3. Pull the fabric taut so that it’s the smoothest surface possible on the reverse, just be careful you aren’t pulling so tight that the image distorts. Staple gun the tea towel to the inside edge of the canvas.  You’ll note that the intro image at the start of the post features some screwed up staples, a hammer and a pair of pliers? Stapling sometimes doesn’t go to plan. Hammer is if you need to hammer in any staples not quite in properly, pliers are for pulling out any really bad ones. Other than that, the only tricky part with this one is the corners. Here’s how I do them (and save this post if you ever plan a DIY upholstered headboard, it’s the same concept for that project too):

How to wrap fabric corners:

 

1. Pretend you are wrapping a present the proper way. You’ve got a top piece of material and a bottom piece right? The top piece is on the reverse of the frame, and the bottom piece is on the front of the frame. Place your finger at the corner. Use the length of your finger to create an indent in the material. Slide your finger to the edge of the frame, then flip the top piece of material up and over your other finger. Probably best to leave this description to visuals!

CREATING AN INDENT IN THE MATERIAL AT THE CORNER

2. Fold this top piece of material out of the way of the corner, hold in place and then staple:

FOLDING THE CORNER, EXCESS FABRIC NEATLY DEALT TO

3. After you’ve stapled, find a natural point to lift the remaining fabric from:

ATTENTION TO DETAIL! CREATING THE SECOND FOLD FOR THE CORNER

4. Lift over and staple the top piece. This approach means you don’t get any excess fabric on the edge of the frame.

CREATING A SECOND FOLD FOR THE FABRIC CORNER

Why go to all this trouble on the corners? Clean tidy finishing – Exhibit A:

NEAT AND TIDY FABRIC CORNER FOLD

 

You’re done! 30 minute project if that. Mine was for the kid’s bathroom to add a bit of interest (a.k.a to draw attention away from the eyeball traumatising disney towels that are so proudly displayed in their bathroom), but this doesn’t have to be for the kids. kitchens, offices, laundries, bedrooms, hallways: any room could benefit from this project really. Enjoy the hunt for the perfect design. It’s a bit addictive. When you do, please tag me on instagram (I’m @houseofralph): I’d love to see what you come up with.

AFFORDABLE ART WITH A TEA TOWEL

 

 

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>